- Home
- Products
- IMS modules
- IMS Analog4
IMS modules
IMS Analog4Analog module
Model: IMS Analog4 · Manufacturer: GSL d.o.o.
The analog module of the IMS system with four configurable channels for measuring voltage, current and temperature.
- 4 configurable I/O channels
- Input/output 0-10 V and 4-20 mA
- RTD: Pt100, Pt500, Pt1000
- Diagnostics and alarm per channel
- Overvoltage protection of all channels up to 40 V
01 / About the product
What is the IMS Analog4?
Each channel is set independently as a voltage or current input/output, an RTD input for temperature measurement or a digital input.
A 2-inch graphic display shows readings and errors on site, with alarms and diagnostics for every channel.
02 / Specifications
Technical data: IMS Analog4
Power supply
| Supply / consumption | 24 V / 2 W |
|---|---|
| Rated / maximum power | 2 W / 3 W |
| Upper voltage limit | 28 V |
| Reverse polarity protection | Yes |
| Overvoltage protection, all channels | 40 V |
Channels
| Configurable I/O | 4 |
|---|---|
| Modes | Input/output 0-10 V, input/output 4-20 mA, RTD, digital input |
| RTD sensors | Pt100, Pt500, Pt1000 |
| Resolution | 16 bit |
| Conversion time per channel | 70 ms (180 / 60 ms) |
Mechanics and environment
| Display | Graphic 2" display, channel and module diagnostics |
|---|---|
| Mounting | DIN rail (EN 60715) |
| Dimensions | 90 × 70 × 65 mm |
| Ingress protection | IP40 |
| Operating temperature | -25 °C to +70 °C |
03 / Documentation
Full technical documentation with wiring diagrams (PDF, in Serbian - English versions on request):
Questions about the IMS Analog4
How do I order the IMS Analog4?
The quote is prepared according to the project and the scope of the system. Send an inquiry to office@gsl.rs or call +381 63 623 757 - on-site presentation and training are free of charge.
Where is the full technical documentation for the IMS Analog4?
On this page, in the Documentation section, you will find the PDF with technical data. The documents are currently in Serbian; English data sheets and detailed wiring diagrams are available on request.
Who manufactures the IMS Analog4?
The device was developed and manufactured by GSL d.o.o. in Novi Sad, Serbia - schematic, PCB, firmware and software are done by our own engineers. That is why we can also adapt it to specific project requirements.
Same category
Related products
IMS modulesIMS Digital8
Digital module
Digital module with configurable inputs and outputs according to IEC 61131, open and short circuit detection per channel and a 2" display.
IMS modulesIMS RS485
Communication module
Universal DIN-rail RS485 communication module: up to 256 nodes, 10 Mbps, 24 V / 2 W.
IMS modulesIMS MODBUS / Ethernet module
Ethernet and MODBUS RTU/TCP module for connecting the IMS system to SCADA, PLC and UPS equipment.
Contact / inquiry
Inquiry for the IMS Analog4
Send us the quantity, location and a short description of the application - we will reply with a quote and technical details. On-site presentation and training are free of charge.
- Phone / call+381 63 623 757
- WhatsApp message+381 63 623 757
- Emailoffice@gsl.rs

